1. Farm Products Processing Industry (1) Development and production of biology feeds, straws and stalks feeds and aquatic feeds

(2) Aquatic products processing, seashell products cleansing and processing, and development of function food made from seaweed

(3) Processing of vegetables, dried and fresh fruits, fowl and livestock products

2. Food Manufacturing Industry

(1) Development and production of fond for babies and agedness, as well as health-care food

(2) Development and production of forest food

(3) Production of natural addictive for foodstuff and food ingredients

3. Drinks Manufacturing Industry

(1) Development and production of drinks of fruits, vegetables, albumen, tea, coffee and vegetables

4. Tobacco Processing Industry

(1) Production of secondary cellulose acetate and processing of tows (limited to equity joint venture and contractual joint venture)

5. Textile Industry

(1) Production of multifunctional textiles of lightweight, high-intensity, thermostability, cold-endurance, chemical-resistance and light fastness for industrial use made with non-woven, machine knitting, knitting, and combined technologies

(2) Weaving and dyeing as well as post dressing of high-grade loomage face fabric made with advanced technologies and equipment of energy-saving and emission reduction

(3) Processing of special natural fiber products satisfying the requirement of comprehensive utilization of ecology and resources and environment protection (including animal fiber, fibrilia, silk and colored cotton such as cashmere)

(4) Production of clothes with computer integrated manufacturing system

(5) Production of functional, environment-friendly and special clothes

(6) Production of top-grade carpet, embroider and drawnwork product

6. Leather, Coat and Feather (Down and Feather) Products Industry

(1) Cleaning processing of leather and fur

(2) Post ornament and processing of leather with new technology

(3) Top-grade leather processing

(4) Comprehensive use of leather waste

7. Lumber Processing Industry and Wood Bamboo, Bine, Palm, Grass Products Industry

(1) Development and production of new technology and products for the comprehensive utilization of "sub-quality, small wood and fuel wood" and bamboo in the forest area

8. Paper Making and Paper Products Industry

(1) Production of chemical wood pulp with an annual production capacity of over 300 thousand tons by a single production line, chemical mechanical wood pulp with an annual production capacity of over 100 thousand tons by a single production line and concurrent high-end paper and paperboard production mainly with overseas lumber resources

9. Petroleum Refining and Coking, Nuclear Fuel Processing Industry

(1) Deep processing of needle coke and coal tar

10. Chemical Raw Material and Products Manufacturing Industry

(1) Development and production of new-type downstream products of sodium-process bleaching powder, polyvinyl chloride and organosilicon

(2) Production of supporting raw materials for synthesized materials: production of propylene oxide by epoxidation of propylene with hydrogen peroxide, epoxy chloropropane from glycerol, NDC and CHDM

(3) Production of synthetic fibre raw materials: precision terephthalic acid, vinyl cyanide, caprolactam, nylon 66 salt and polyurethane elastic fiber and 1, 3-propanediol

(4) Production of synthetic rubber: liquid butadiene styrene rubber by butadiene method(excluding styrene-butadiene rubber), high cis-1, 4-polybutadiene rubber, butyl rubber, isoamyl rubber, polyurethane rubber, acrylic rubber, chlorophydrin rubber, ethylene-propylene-rubber, fluororubber, silicon rubber and other special rubber production)

(5) Production of engineering plastics and plastic alloys: PC with an annual production capacity of over 60 thousand tons, POM, polyamide (nylon 6, nylon 66, nylon 11 and nylon 12), EVA, polyphenylene sulfide, PEEK, polyimide, polysulfone, polyether sulphone, PAR, liquid crystal polymer and other products

(6) Fine chemistry industry: new products and technology for catalytic agent; processing technology for the commercialization of dye (pigment); production of high-tech chemicals for electronics and paper-making, food additives, feed additives, leather chemical products (excluding N,N-dimethylformamide), oil-well auxiliaries, surface active agent, water treatment agent, adhesivcs, inorganic fibre, inorganic nanomaterial production and deep processing of pigment encapsulation.

(7) Production of environment-friendly printing ink and environment-friendly arene-oil

(8) Production of nature spices, synthetic spices and single ion spices

(9) Production of high capability coatings, water automotive coatings and assorted water resin

(10) Production of chlorofluorocarbon substitution

(11) Production of fluororesin, fluorine film materials, fluorine-containing intermediate products for medical use, environment-friendly cryogen and detergent

(12) Production of fluorine recycling from phosphorus chemicals and aluminum smelting

(13) Development and production of new technology and products for the forestry chemicals

(14) Development and production of inorganic, organic and biologic films for environment protection

(15) Development and production of new-type fertilizer: biologic fertilizer, high-density fertilizer, compound fertilizer, controlled release fertilizer, compound microbial inoculant, Compound microbial manure, degradation agent for stalks and garbage and microbial preparation of special functions

(16) Development and production of effective, safe and environment-friendly new varieties, new formulations, special-purpose intermediates and accessory ingredients of pesticides; and development and application of relevant clean production processing (methylene technology for producing acetochlor, method for paraquat by ammoniacal cyanide process, aqueous phase synthesis of chlorpyrifos, recycling chloromethane during production of glyphosate, production of oriented synthesis chiral pesticides and cubic pesticides, and synthesis technology for diethyl thiophosphoryl chloride)

(17) Development and production of biopesticide and bio-control products: microbial insecticide, microbial fungicide, agricultural antibiotic, insect pheromone, enemy insect and microbial herbicide

(18) Comprehensive utilization and disposal of exhaust gas, discharge liquid, waste residue

(19) Production of organic polymer material: covering film for plane, rare earth cerium sulphide red dye, lead-free in electronic packages, serials of special sizing agent by photoetching for color Plasma Display Panel, small diameter and large specific surface area superfine fibre, high precision fuel filter paper, and Li-ion battery membrane

11. Medical and Pharmaceutical Products Industry

(1) Production of new type compound medication of active composition medication (including bulk drug and preparation)

(2) Production of amino acids: tryptophan prepared by zymotechnics, hstidine, methionine for feed

(3) Production of new anti cancer medication, new cardio-cerebrovascular medication and new nervous system using medication

(4) Production of new type medication using bioengineering technology

(5) Production of AIDS vaccine, hepatitis C vaccine, contraceptive vaccine, and new vaccines such as cervical cancer vaccine, malaria vaccine, and hand-foot-mouth disease vaccine

(6) Production of biology vaccine

(7) Exploitation and production of marine drug

(8) Drug preparation: production of new formulation using new technologies of sustained-release, release, targeting and percutaneous absorption

(9) Exploitation and production of new type of pharmaceutic adjuavant

(10) Production of antibacterial active pharmaceutical ingredients for animals (including antibiotics and chemosynthesis drugs)

(11) Exploitation and production of animal using antibacterial drug, insect repellent, pesticide, anticoccidial drug and new formulation

(12) Production of new diagnosis reagent

12. Manufacturing Industry of Chemical Fiber

(1) Production of hi-tech chemical fiber (excluding viscose fiber) of differential chemical fiber, aramid, carbon fiber, polyethylene of high-strength and high-mode, polyphenylene sulfide(PPS) and so on

(2) Production of new style of fiber and non-fiber polyester: PTT, PEN, PCT, and PETG

(3) Production of biopolymer fiber by using new renewable resources and environment-friendly processing: lyocell, cellulose made from bamboo and hemp, PLA, chitin fiber, PHA and plant and animal protein fiber

(4) Production of polyamide, single line production capacity of 150 ton a day

(5) Production of meridian tyre aramid fiber and tyre cord

13. Industry of Plastic Products

(1) Development and production of new-type multi-functional photo-biological broad agricultural films

(2) Digestion and recycle of waste plastics

(3) Exploitation and production of new technology and new production of plastic soft package (high barrier, multi-function film and material)

14. Non-metal Mineral Products Processing Industry

(1) Development and production of energy-saving, environment-protecting, lightweight and high-intensity, high-performance and multi-functional architecture materials

(2) Use plastic to replace steel and wood, energy-saving and high-efficient chemical architecture material production

(3) Production of elastomer, plastic changeable asphaltum waterproof coiled materials, broad (more than 2 meters) waterproof EPDM coiled materials and matched materials, broad (more than 2 meters) waterproof PVC coiled material, and TPO waterproof coiled materials with a production capacity of more than 10,000,000 sq.m.

(4) Development and production of functional glass with new technologies: electromagnetic wave shielding glass, micro-electronics glass substrate, infrared transmitting lead-free glass, electronic-grade large-scale quartz glass products (pipes, boards, crucibles and apparatuses), multi-functional windshield glass of excellent optical performance, extreme IT materials and products (including quartz glass bushing and ceramic wafer for waveguide-grade, high-precise optical fiber preform rod), and purification processing of raw materials for high pure (≥99.998%) or ultrapure (≥99.999%) crystal

(5) Production of conductive glass for film batteries and glass for solar illuminator

(6) Production of glass fiber products and special glass fiber: low dielectric glass fiber, quartz glass fiber, high silica glass fiber, high strength and high elasticity glass and ceramic fiber and their products

(7) Production of optical fiber and its products: coherent fiber bundle and laser medical optic fiber, exceeding two generation and three generation microchannel plate, optic fiber panel and inverse image implement and light cone glass

(8) Standardization refine of ceramic material and production of high-level decorative materials used for ceramics.

(9) Production of environment-friendly (non-chromizing) refractory material used in furnaces such as cement, electronic glasses, ceramics and microporous carbon brick.

(10) Production of AIN ceramic base piece and multiple-hole ceramics.

(11) Production of inorganic, non-metal materials and products: compound materials, special kind of ceramics, special kind of airproof materials (including quick oil sealed materials), special friction materials (including high-speed friction brake materials), special kinds of cementation materials, special type latex materials, water rubber materials, and nanomaterials.

(12) Production of thermal insulation materials of organic-inorganic compound foam

(13) Production of high-tech compound materials: sequential fiber increasing thermoplasticity compound materials and prepreg, endure heat > 300℃ colophony compound material moulding craftwork assistant materials, colophony compound material (including top grade sports articles and vehicle parts of lightweight and high-intensity), special function compound materials and products (including deep water and diving compound material products and medical and healing use compound material products), carbon/carbon compound materials, high capability ceramic compound materials and products, metal compound materials and products, metal layer compound materials and products, pressure≥320MPa super-high-pressure compound rubber pipes, air bus aviation tyres.

(14) Production of precision high capability ceramic materials: carborundum super-minute powder(purity > 99%, average granule diameter < 1μm), Si3N4 super-minute powder(purity > 99%, average granule diameter < 1μm), high pure and super-minute alumina powder(purity > 99%, average granule diameter < 0.5μm), low temperature sintered zirconia powder(sintered temperature < 1350℃) , high pure AlN powder (purity > 99%, average granule diameter < 1μm), rutile TiO2 powder(purity > 98.5%), white char black(average granule diameter < 100nm＝, barium titanate (purity > 99%, average granule diameter < 1μm＝.

(15) Development and production of high-quality artificial crystal and crystal film products: high-quality artificially synthesized crystal (piezoelectric crystal and crystals for ultraviolet ray transmitting crystal), super hard crystal (cubic boron nitride crystal), high-temperature resistant and highly-insulated artificially synthesized crystal (artificially synthesized mica), new electro-optic crystal, high-power laser crystal and large-size glittering crystal, diamond film tools, super-thin artificial diamond saw blades with thickness of not more than 0.3mm

(16) Deep processing of non-metal mineral products (super-thin comminution, high level pure, fine production, modification)

(17) Production of super high power black lead electrode.

(18) Production of pearlite mica (granule diameter: 3-150μm).

(19) Production of multi-dimension and multi-direction integer weaving fabric and profile modeling fabric.

(20) Use new dry cement kiln to innocuously dispose solid waste.

(21) Recycling of construction waste

(22) Comprehensive utilization of industrial by-products gypsum

(23) Development and application of new technologies for the comprehensive utilization of non-metal mine tailings, and the ecological restoration of mines

15. Non-Ferrous Metallurgical Smelting and Rolling Processing Industry

(1) Production of diameter > 200mm silicon single crystal and polishing piece.

(2) Production of high tech non-ferrous metallurgical materials: compound semiconductor materials (gallium arsenide, gallium phoshpide, gallium reexplanation, gallium nitride), high temperature superconduct materials, memory alloy materials (titanium nickel，copper and iron memory alloy materials) , super minute (nanometer) calcium carbide and super minute (nanometer) crystal hard ally, superhard compound materials, noble metal compound materials, aluminum foil used for radiator, middle and high pressure cathode capacitance aluminum foil, special kind of large aluminum alloy materials, aluminum alloy precise model forge product, electrization railway built on stilts leads, super-thin copper strip, erosion proof heat exchanger copper alloy material, high capability copper nickel, copper and iron alloy strip, beryllium copper strip, thread, tube and stick process material, high temperature bearable tungsten filament, magnesium alloy cast, non-lead solder, magnesium alloy and its applicable products, bubble aluminum, titanium alloy strip materials and titanium jointing pipes, atomic energy grade sponge zirconium, tungsten and molybdenum deep machining products.

16. Metal products industry

(1) Research, development and manufacturing of new lightweight and environment-friendly materials for aviation, aerospace, automobiles and motorcycles (special-purpose aluminum sheets, aluminum-magnesium alloy materials, and aluminum alloy motorcycle frames and so on)

(2) Development and production of high-grade hardware for construction, hot-water heating equipment and hardware parts.

(3) Production and processing (including painting and processing inner and outer surface of the products) of metal packing products (thickness < 0.3mm) used to pack all kinds of grain, oil and food, fruits, vegetables, beverages, daily using materials and such contents.

(4) Manufacturing of nickel-saving stainless steel products

17. General Machine-building Industry

(1) Manufacturing of numerically controlled machine tools of high level and key spare parts: numerically controlled machine tools which exceed quintuple linkage, digital control coordinate spindle processing centre，digital control system which exceeds quintuple linkage and servomechanism installations, high-speed and super-strong knifes for exact digital control manufacturing.

(2) Manufacturing of multi-station forging forming machine of 1000 tons or more

(3) Manufacturing of equipments for braking up and smashing retired cars

(4) Manufacturing of soft FTL product line

(5) Manufacturing of vertical articulated industrial robots, welding robots and welding equipments thereof

(6) Manufacturing of special processing machines: complete sets of laser cutting and welding equipments, exact processing laser equipments, digital-control and low-speed wire-cuts, submicron cracker

(7) Manufacturing of wheel or crawler crane of 300 tons or more (limited to equity joint ventures or contractual joint ventures)

(8) Design and manufacturing of high pressure plunger pumps of pressure(35-42MPa) and engine, design and manufacturing of low-speed big torquey engine of pressure(35-42MPa)

(9) Manufacturing of integrated hydraulic-pressure multiple unit valve with working pressure≥ 25MPa and electro-hydraulic proportional servo elements.

(10) Design and manufacturing of valve terminal, pneumatic solenoid valve of less than 0.35W and high-frequency electrically-controlled gas valve of 200Hz or more

(11) Design and manufacturing of hydrostatic drive device

(12) Development and manufacturing of non-contacting gas film seal of pressure more than 10MPa, dry gas seal of pressure more than 10MPa (including experience device)

(13) Development and manufacturing of macromolecule material device for automobiles(rub piece, changed phenol aldehyde plunger, non-metal liquid pressure mother pump and so on)

(14) Manufacturing of car boss axletree of 3 and 4 generation(function elements of boss axletree of flange and transducer inside or outside of the axletree，digital control machine tool or processing centre axletree of high or mid class(the processing center should have more than three axis interlocking function and 3-4μm repeated precision) ，high-speed wire or board rolling mill axletree(assistant axletree and roller axletree of single-wire rolling mill of more than 120m/s and of thin-board rolling mill of more than 2mm) ，high-speed railway axletree(with speed of more than 200km/h) ，low-noise axletree of vibration of less than Z4(Z4, Z4P, V4, V4P) ，level P4, P2 axletree of various axletree

(15) Manufacturing of high-density, high-precision and complex-shaped powder metallurgical parts and chains used for automobile, engineering machinery, etc

(16) Manufacturing of gear transmission for wind power, high-speed train, gear transmission agent with adjustable blades for vessels, and large-sized and heavy-loaded gear boxes

(17) Manufacturing of high binding spares of 12.9 level or more

(18) Development and manufacturing of accumulator bladders and rubber and plastic seals for hydropneumatic use

(19) Remanufacturing of machine tools, spare parts of cars(except five matured varieties)and project machines.

(20) Manufacturing of miniature precision transmission joint pieces (clutches)

(21) Manufacturing of coupling shaft for heavy rolling mills

(22) Remanufacturing of machinery such as machine tools, engineering machinery and railway locomotives and remanufacturing of automotive parts and components

18. Special Equipment Manufacturing

(1) Manufacturing of mine trolley mining, loading and transporting device：mechanical drive tipper for mine of 100 tons or more, mobile crusher, wheeled digger of 3000m3/h or more, loading machine for mine of 5 m3 or more, electric driving mining machine of 2000 kw or more and so on

(2) Manufacturing of geophysical, logging equipment: MEME geophone, digital telemetry seismograph, digital imaging, computerized logging system, horizontal wells, directional wells, drilling rig equipment and apparatus, MWD logging while drilling

(3) Manufacturing of equipment for oil exploration, drilling, collection and transportation: floating drilling systems and floating production systems with an operating water depth of more than 1500 meters and the supporting subsea oil extraction, collection and transportation equipment

(4) Manufacturing of large-caliber rotary drilling rigs with a caliber of 2 meters or more and depth of 30 meters or more, push benchers with a diameter of 1.2 meters or more, complete sets of large equipment with a pull-back force of 300 tons or more for laying underground pipes and lines without digging, and underground diaphragm wall construction drilling rigs

(5) Design and manufacturing of large bulldozers of 520 horesepower or more.

(6) Design and manufacturing of pedrail soil shifter of ground pressure of 0.03MPa or less, power of 220 hp or more，large soil shifter of 520 hp or more

(7) Design and manufacturing of purge machine of 100 m3/h or more, digging device in digging vessel of 5000 tons or more

(8) Design and manufacturing of tuffcrete diosmosing-proof wall for flood control bar

(9) Manufacturing of machine for underwater mass：soil shifter, loader and digger 9 miles under water

(10) Manufacturing of devices of road bridge maintaining and automatic testing

(11) Manufacturing of devices of road tunnel supervision, winding, disaster control and rescuing system

(12) Design and manufacturing of the large-scale railway construction, and operation of large-scale road maintenance machinery and safety equipment

(13) Manufacturing of (asphalt) shingles equipment, galvanized steel and other metal roof production equipment

(14) Manufacturing of spot spraying polyurethane waterproof thermal insulation system equipment which could protect environment and conserve energy, technology and equipment of polyurethane sealant paste preparation, technology and production equipment of modified silicone sealing paste preparation

(15) Design and manufacturing of thin-slab continuous casting machine, high-precision strip mill (with thickness of precise 10 microns)

(16)Manufacturing of the key equipment of complete sets of ethylene equipment with an annual capacity of 1 million tons or more: mixing granulators with an annual processing capacity of 400,000 tons or more, helical-conveyer centrifuges with a diameter of 1000 mm or more, and low-flow high-head centrifugal pump

(17) Manufacturing of high power DC electric arc furnace of 50 tons or more

(18) Manufacturing of colorful panting or plating board devices

(19) Manufacturing of selecting device for multi-element, fine-powder and hard-selecting mine

(20) Design and manufacturing of production equipment for automotive power batteries

(21) Manufacturing of large complete devices of chemical processing of coal(limited to equity joint ventures or contractual joint ventures)

(22) Design, manufacturing and maintaining of metal product moulds(such as extrusion moulds of pipe, stick and shape of copper, aluminum, titanium and zirconium)

(23) Design and maintaining of punching mould of cover elements of automobile outside, clamp and test tools of automobile and motorcycle

(24) Design and maintaining of punching mould with precision of more than 0.02 millimeter (including 0.02 millimeter), precise mould with precision of more than 0.05 millimeter (including 0.05 millimeter) and mould standard elements.

(25) Design and manufacturing of nonmetal product moulds

(26) Manufacturing of beer filling device of 60000 bottles /h or more, drink mid or high hot filling device of 5 bottles /h, asepticism filling device of 36000 bottles /h or more

(27) Manufacturing of producing technologies and key equipments for aminophenol, zymi, food addiitive and so on

(28) Manufacturing of complete feed processing equipment of 10tons/h or more and key parts thereof

(29) Manufacturing of light board and box device of 0.75-millimeter high or less

(30) Manufacturing of single in folio colorful lithographic printing machine with speed of more than 16000 pages in folio /h(720×1020 millimeters) , diprosopia in folio colorful lithographic printing machine with speed of 13000 pages in folio /h(720×1020 millimeters) , colorful lithographic in folio printing machine with speed of 13000 pages in folio /h(1000×1400 millimeters)

(31)Manufacturing of automatic coating machines for electron guns

(32) Manufacturing of colorful soft printing machine with speed of 300meters/m or more and coverage of 1000 millimeters or more

(33) Manufacturing of computer mass color pre-coordination systems, mass color remote handling systems, mass speed following systems, prints quality automatic testing and following systems, no-axis turning technologies, high-speed automatic splicer, paper giving machine and high-speed and automatic remote handling paper folding machine, automatic overprinting system, cooling device, silanion putting system, bias-adjusting device and so on.

(34) Deep processing technique and equipment manufacturing of plate glass

(35) Special high-tech Industrial sewing machines manufacturing

(36) Manufacturing of complete set of new type of paper (including pulp) making machines

(37) Manufacturing of equipment with new technique for post ornament and processing of leather

(38) Development and Manufacturing of new agriculture processing and storage equipment: new equipment for the processing, storage, preservation, classifying, packing, and drying of food, oil, vegetables, diried fruits and fresh fruits, flowers, meat and aqua-products; agricultural product quality testing equipment ; the quality detection equipment of agricultural products' damage; Rheometer; Farinograph; ultrafine pulverization equipment; Highly efficient dewatering equipment ; 5-grade plus high efficient fruit juice condensation equipment；equipment for Disinfection of powder food in Media; Aseptic packaging equipment for Semi-solid and solid food; Packaging Materials for Aseptic packaging, DVS Bacteria Starter for Dairy Production, Disc-type Separation centrifuges

(39) Manufacturing of Agricultural machinery: facility agriculture equipment(greenhouse Automatic irrigation equipment, Autocontrol configuration and fertilization Equipment of Nutritious Liquid, Efficient vegetable nursery equipment, Soil nutrient analysis instruments ), Tractor and associated farm tools with 120 kilowatts and above Matching engine power, Low fuel consumption, low noise and low-emission diesel engine, Spray Machines with Residual fog tablets Recovery Unit matching of large tractor, High-performance rice transplanter, Cotton harvesting machine, Adapted to a variety of row-spacing Self-moving Maize Reaping Machine(Hydraulic drive or mechanical drive)

(40) Manufacturing of new technical forestry equipment

(41) Manufacturing of equipment for reusing in fields and comprehensive utilization of straws and stalks of crop, Manufacturing of equipment for comprehensive utilization of Rice Husk

(42) Manufacturing of equipment for comprehensive utilization of waste agriculture products and waste fowl and livestock products which are bred in scale

(43) Manufacturing of festival fertilizer, pesticide section, water-saving technical Agriculture equipment

(44) Manufacturing of cleaning equipment for electromechanical wells and equipments for Laundering drug production

(45) Manufacturing of electronic endoscopes

(46) Manufacturing of Fundus Cameras

(47) Manufacturing of Medical imaging equipments' Key components(high magnetic field intensity and superconduct MRI, CT, X-ray computed tomography, type-B ultrasonic )

(48) Manufacturing of Medical Ultrasonic Transducer(3D)

(49) Manufacturing of boron neutron capture therapy equipments

(50) Manufacturing of X-ray Stereotactic Radiotherapy System

(51) Manufacturing of Hemodialysis, Blood Filter

(52) Manufacturing of multi-layer co-extruded water-cooled blown film equipment for non-PVC medical infusion bags

(53) New techniques of quality control of medicine products and new equipment manufacturing

(54) New analytical techniques and extraction technologies, and equipment development and manufacturing for the effective parts of traditional Chinese medicines

(55) Producing and manufacturing of new packing materials, new containers for medicine, and advanced medicine producing equipment

(56) Development and Manufacturing of equipment of new type of knitting machines, Key parts and Textile testing, laboratory equipment

(57) Manufacturing of water pollution prevention and control equipment: horizontal spiral centrifugal dehydrators, membrane and membrane materials, ozone generators with a capacity of more than 50kg/h, chlorine dioxide generators with a capacity of more than 10 kg/h, ultraviolet disinfection devices, small domestic sewage treatment equipment used in rural areas, and heavy metal wastewater treatment equipment

(58) Manufacturing of solid waste treatment and disposal equipment: sewage plant sludge disposal and resource utilization equipment, complete sets of refuse incineration equipment with a daily treatment capacity of 500 tons or more, landfill leachate treatment technology and equipment, anti-seepage geomembranes in landfills, building waste treatment and resource recovery utilization equipment, devices for disposal of hazardous waste, devices for biogas power generation in landfills, scrap steel treatment equipment, and remediation equipment for contaminated soil

(59)Development and manufacturing of equipment for the comprehensive utilization of red mud from aluminum industry

(60)Manufacturing of equipment for the comprehensive utilization of mine tailings

(61) Manufacturing of Waste plastics, electronics, rubber, battery Recycling Equipments

(62) Manufacturing of reclamation equipment for used and waste textiles

(63) Manufacturing of equipment for the remanufacturing of waste mechanical and electrical products

(64) Manufacturing of special Meteorological observation and analysis equipments

(65) Development of Seismic station, Seismic Network, and Mobile seismological observation technology System, and Manufacturing of equipments

(66) Manufacturing of portable assembling water purification equipment

(67) Unconventional water treatment, recycling equipment and water quality monitoring instruments

(68) Leak test equipment and instruments for industrial water pipeline networks and equipment (appliances)

(69) Manufacturing of preparation, storage and transportation equipment and inspection systems of hydrogen energy

(70) Manufacturing of new Heavy residue gasification Atomization Nozzle, Steam leakage rate of 0.5 percent and below efficient Steam Traps, 1000 ° C and above high-temperature ceramic heat exchanger manufacturer

(71) Development of Seismic station, Seismic Network, and Mobile seismological observation technology System, and Manufacturing of equipments

(72) Manufacturing of three-drum radial tire building machines

(73) Manufacturing of Rolling resistance testing machine and Tire noise lab

(74) Manufacturing of new Heating measurement and Temperature Control Device Technical equipments

(75) Manufacturing of preparation, storage and transportation equipment and inspection systems of hydrogen energy

(76) Manufacturing of new Heavy residue gasification Atomization Nozzle, Steam leakage rate of 0.5 percent and below efficient Steam Traps, 1000 ° C and above high-temperature ceramic heat exchanger manufacturer.

(77) Manufacturing of devices for recovery of marine oil spill

(78) Manufacturing of equipment for utilization of low concentration coal-mine gas and ventilation air methane

19. Communication and Transportation Equipment Industries

(1) Manufacturing of complete automobiles (foreign investments shall not exceed 50%)and construction of automobiles research and development organization

(2) Manufacturing of automobile engine, reused manufacture of engines and construction of engine research and development organization：gasoline motor with output per litre not lower than 50 kw, diesel motor with output per litre not lower than 40 kw and discharge capacity below 3 liters, diesel motor with output per litre not lower than 30 kw and discharge capacity above 3 liters, motor driven by such new resources as fuel cells and compound fuel

(3) Manufacturing of key spare parts for automobiles as well as research and development of key technologies: complete disc brakes, complete driving rods, automatic gearboxes, fuel pumps of diesel engine, inhalant supercharger of engines, adhesive axial organ(used for four-wheel drive), hydraulic tappet, electronic cluster gauge, crankshaft and connecting bar(diesel motor above 8 liters), Anti－Lock Brake System(ABS, ECU, valve body, sensor) , ESP, BBW, electronic braking distribution system(EBD) , driving control system, gas generator for automobile airbags, electronic fuel injection system, sprays technology on fuel common rail technology(utmost spray pressure above 1600 pa) , VGT, VNT, discharge control equipment of motor meeting the pollutant discharge standard of the fourth phase of China, ITM and coupler assembly, Steer-by-Wire System, Diesel Particulate Filter(DPF), intelligent cylinder, special rubber automobile components

(4) Manufacturing of key parts and components of new energy vehicles: high energy power batteries (energy density ≥ 110Wh/kg cycle life ≥ 2000 times, and the proportion of foreign investment not exceeding 50%), anode materials of batteries (specific capacity ≥ 150mAh / g, and cycle life of 2000 times with not less than 80% of initial discharge capacity), battery separators (thickness of 15-40μm, porosity of 40% -60%); Battery management systems, motor management systems, and electronic control integration of electric vehicles; driving motors of electric vehicles (peak power density ≥ 2.5kW/kg, high efficiency area: 65%, working area efficiency ≥ 80%), automotive DC / DC (input voltage of 100V-400V), high-power electronic devices (IGBTs, voltage class ≥600V, current ≥ 300A); and plug-in hybrid electromechanical coupling drive systems

(5) Manufacturing of key parts for high discharge motorcycle(discharge of over 250ml):technology of electrical control fuel injection for motorcycle (limited to equity joint ventures or contractual joint ventures), engine discharging control device which satisfy motorcycle discharging criteria stage Ⅲ of China

(6) Equipment for railway transportation(limited to equity joint ventures or contractual joint ventures): research and development, design as well as manufacturing of complete train and key spare parts(drive system, control system, brake system)of rapid transit railway, railway of passenger special line, intercity railway, trunk railway and equipment for urban railway transportation；research and development, design as well as manufacturing of passenger service facilities and equipment for rapid transit railway, railway of passenger special line, intercity railway and urban railway transportation; design as well as research and development of related information system in the process of construction of information age; research and development, design as well as manufacturing of railway and bridge facilities and equipments for rapid transit railway, railway of passenger special line, intercity railway，manufacturing of equipment and fixtures for electrical railway, research and development of technologies for controlling railway noise and vibrating, manufacturing of discharging equipment for trains, manufacturing of safety monitoring equipment for railway transportation

(7) Design, manufacturing and maintaining of civil plane: those of trunk and branch lines(Chinese part shall hold the majority of shares) ，general ones(limited to equity joint ventures or contractual joint ventures)

(8) Production and maintaining of spares parts for civil planes

(9) Design and manufacturing of civil helicopters：those of three tons or more(Chinese part shall hold the majority of shares), those of less than three tons (limited to equity joint ventures or contractual joint ventures)

(10) Production of spares parts for civil helicopters

(11) Manufacturing of ground and water effect plane (Chinese part shall hold the majority of shares)

(12) Design and manufacturing of no-people plane and aerostat (Chinese part shall hold the majority of shares)

(13) Design, manufacturing and maintaining of plane engines and spare parts as well as air assistant power system (limited to equity joint ventures or contractual joint ventures)

(14) Design and manufacturing of civil air-borne equipment (limited to equity joint ventures or contractual joint ventures)

(15) Manufacturing of flight ground equipments: civil airfield facilities, support equipment for civil airfield work, ground equipment for flight test, equipment for flight simulation and practice, equipment for aeronautic testing and measuring, equipment for aeronautic ground testing, comprehensive testing equipment for machines, special equipment for aeronautic manufacturing, equipment for pilot manufacturing aeronautic materials, ground receiving and applying equipment for civil aircraft, ground testing equipment for rocket launcher, equipment for dynamic and environmental experience for rocket launcher

(16) Manufacturing of mechanical and electrical products for aircrafts, temperature control products for aircrafts, test equipment for planet products and structure and organization products for aircrafts

(17) Manufacturing of light gas-turbine engine

(18) Design of luxury cruise and equipment for deep-water(over 3000 meters) ocean project(limited to equity joint ventures or contractual joint ventures)

(19) Manufacturing and maintaining of equipment for ocean project(including stages)(Chinese part shall hold the majority of shares)

(20) Design of diesel engine in low or medium speed for vessel (limited to equity joint ventures or contractual joint ventures)

(21) Manufacturing of diesel engine in low and medium speed for vessel as well as crankshafts (Chinese part shall hold the majority of shares)

(22) Design and manufacturing of machinery for vessel compartment(Chinese part shall hold the relative majority of shares)

(23) Design and manufacturing of communication and directing systems for vessels：communication systems, electronic directing equipment, vessel radar, electric compass automatic pilot, public broadcasting systems inside vessels and so on

(24) Design and manufacturing of cruiser (limited to equity joint ventures or contractual joint ventures)

20. Electric Machinery and Equipment Manufacturing Industries

(1) Manufacturing of key auxiliary equipment used for 1 million KW ultra supercritical fire-electricity generating set(limited to equity joint ventures and cooperative joint ventures): safety valve and control valve

(2) Manufacturing of the equipment of coal-fired power plant and denitrification technology for sintering machine in steel industry

(3) Design and manufacturing of seal parts for fire-electricity equipment

(4) Manufacturing of large scale castings and forgings used for coal-fired power plant and hydropower station

(5) Manufacturing of key auxiliary equipment used for hydroelectric generating set

(6) Manufacturing of power transmitting and transforming equipment (limited to equity joint ventures and cooperative joint ventures): amorphous alloy transformer, operator used for high-voltage switch of 500KV or more, arc extinguishing device, large-scale disk type insulator(over 1000KV and 50KA), outlet device used for transformer of 500KV or more, casing pipe(AC:500KV,750KV,1000KV and all DC specifications), voltage regulating switch(loaded and unloaded voltage regulating switch for AC 500KV,750KV and 1000KV), dry-type smoothing reactor used for DC transmission, more or less 800KV converter valve used for DC transmission(water cooling equipment and DC field equipment), electrical apparatus contact material as well as non-Pb and non-Cd solders accorded with EU command of RoHS

(7) Manufacturing of complete sets of or key new energy equipments for electricity power generation: photovoltaic power generation, geothermal power generation, tidal power generation, wave power generation, rubbish power generation, methane power generation and wind power generation of 2.5MW or above

(8) Manufacturing of large pumped-storage power units of 350MW power ratings or more(limited to equity joint ventures and cooperative joint ventures): pump turbines and speed controller, large-scale reversible pump-turbine units with varied speed, power generator and excitation, launching apparatus and other accessory equipments

(9) Manufacturing of Stirling generating set

(10) Development and manufacturing of straight line and plane motor and drive system

(11) Manufacturing of high-tech green battery: dynamic Ni-Mh battery, zinc and nickel storage cell, zinc and silver storage cell, lithium-ion battery, solar battery, fuel battery and so on(excluding high power battery for new energy vehicles)

(12) Electric motor is manufactured by refrigerating and air-conditioning compressors adopting DC speed adjustment technology or CO2 natural refrigerants, and by refrigerating and air-conditioning equipments applying renewable energy(air source, water source and geothermal source)

(13) Manufacturing of solar air conditioning, heating system and solar dryer apparatus

(14) Manufacturing of biomass drying pyrolysis system and biomass gasification unit

(15) Manufacturing of AC-FM voltage regulation drawbar

21. Communication Equipment, Computer and Other Electronic Equipment Manufacturing

(1) Manufacturing of HD digital video camera and digital sound-playing equipment

(2) Manufacturing of flat panel display such as TFT-LCD, PDP and OLED, and materials of flat panel display (excluding TFT-LCD glass substrate of the 6th generation or below)

(3) Manufacturing of such key parts as optical engine, light source, projection screen, high-resolution projection tube and LCOS module used in large screen color projection display

(4) Manufacturing of digital audio and visual coding or decoding equipment, digital broadcasting TV studio equipment, digital cable TV system equipment, digital audio broadcasting transmission equipment, digital television converter, digital television broadcasting Single Frequency Network(SFN), satellite digital TV up-linking station and front-end equipment of SMATV

(5) Design of integrate circuit, and manufacturing of large digital integrate circuit with its wire width of 0.18 micron or below, manufacturing of simulated and digital analogy integrate circuit of 0.8 micron or below, and the encapsulation and test of such advanced equipment as BGA, PGA, CSP, MCM and so on

(6) Manufacturing of large and medium-sized computer, high-performance computer with its operation more than 100 trillion times, portable micro computer, high-rank server with its operation more than 1 trillion times per second, large scale simulated system and large industrial control mechanism and controller

(7) Manufacturing of computer digital signal processing system and board card

(8) Manufacturing of figure and image recognition and processing system

(9) Development and manufacturing of large-capability optical and disk driver as well as relevant components

(10) Manufacturing of high-speed storage system and intelligent storage equipment with its capability more than 100 TB

(11) Manufacturing of Computer Assistance Design(three-dimensional CAD), Computer Assisted Testing (CAT,Computer Aided Manufacture(CAM), Computer Aided Engineering(CAE) and other computer application systems

(12) Development and manufacturing of software product

(13) Development and manufacturing of specialized electronic material (excluding the development and manufacturing of optical fibre perform rod)

(14) Manufacturing of specialized electronic equipment, testing equipment and tools and moulds

(15) Manufacturing of new type electronic components and parts: slice components, sensitive components and sensors, frequency monitoring and selecting components, mix integrated circuit, electrical and electronic components, photoelectric components, new type components for machinery and electronics, high polymer solid capacitor, super capacitor, integrated passive components, high-density interlinked build-up board, multilayer flexible board, flexible printing circuit board and packaging substrate

(16) Manufacturing of touch control system (touch control screen and components)

(17) High-brightness LBD with its luminous efficiency more than 1001m/W, epitaxial slice LBD(blue) with its luminous efficiency more than 1001m/W, white luminous tube with luminous efficiency more than 1001m/W and its power more than 200mW

(18) Development and manufacturing of key components and parts used in high-precision digital CD drive

(19) Reproduction of read-only compact disk and manufacturing of recordable compact disk

(20) Design and manufacturing of civil satellites (Chinese partner shall hold the majority of shares)

(21) Manufacturing of civil satellites effective payload (Chinese partner shall hold the majority of shares)

(22) Manufacturing of spare parts for civil satellites

(23) Manufacturing of telecommunication system equipment for satellites

(24) Manufacturing of receiving equipment of satellite navigation and key components

(25) Manufacturing of optical communication measuring instrument and light transceiver with its speed more than 10Gb/s

(26) Manufacturing of Ultra Broad Band (UWB) communication equipment

(27) Manufacturing of wireless Local Area Network(including support of WAPI) and Wide Area Network equipment

(28) Rate time division multiplex equipment(TDM) with speed more than 40Gbps, dense wavelength division multiplex equipment(DWDM), broadband passive network devices(including EPON, GPON, WDM-PON, etc.), next-generation DSL chip and its equipement, optical cross connect(OXC), automatic switch optical network(ASON), and optical fiber communication and transmission equipment more than 40G/sSDH

(29) Development and manufacturing of next-generation Internet system equipment, terminal equipment, testing equipment, software and chips based on IPv6

(30) Development and manufacturing of third-generation and the following mobile communication system mobile phone, base station, core network equipment and network testing equipment

(31) Development and manufacturing of high-end router, network switcher of more than 1 gigabit

(32) Manufacturing of the equipment for air traffic control system (limited to joint venture and cooperation)

22. Machinery Manufacturing Industries for Instrument and Meter as well as Culture and Office

(1) Manufacturing of automation control system and apparatus in industrial processing: field-bus control system, large programmable logic controller(PLC), two-phase flowmeter and solid flowmeter, new type sensor and field measurement instrument

(2) Development and manufacturing of large-scale sophisticated instruments: electron microscope, laser scanning microscope, scanning tunneling microscope, electron microprobe, large-scale metallurgical microscope, photoelectric direct-reading spectrometer, Raman spectrometer, mass spectrometer, chromatography-mass spectrometer, nuclear magnetic resonance spectrometer, nergy dispersive system, X-ray fluorescence spectrometer, diffraction analysis system, industrial CT, 450KV industrial X-ray inspection machine, large-scale dynamic balancing machine, automatic testing system of on-line mechanical quality, three coordinate measuring machine, laser comparator, electrical prospecting apparatus, over 500m airborne electrical prospecting and gamma-ray spectrometry measuring insrument, borehloe gravimetry and three dimensional magnetograph, high-precision microgal and aviation gravity gradiometer, high precision micro-gamma gravity and airborne gravity gradiometry instrument, grating scale and encoder

(3) Manufacturing of high-precision digital voltmeter, current meter(with measuring range of seven bit and a half and above)

(4) Manufacturing of wattless power automatic compensation equipment

(5) Manufacturing of new instrument and equipment for safety production

(6) Manufacturing of VXI bus automatic test system (in accordance with IEEE1155 international standards)

(7) Development and manufacturing of comprehensive management system for under-mine monitoring and disaster-forecasting apparatus and coal safety measurement

(8) Manufacturing of the equipment for engineering measurement and global geographical observation: digital triangle surveying system, digital programmed system for three-dimensional topography model (acreage>1000×1000mm, horizontal error<1mm, altitude error <0.5mm), ultral wideband seismograph(φ<5cm, frequency band0.01-50HZ, equivalent quaking speed noise<10-9m/s), integrated earthquake data processing system, extensive under-well earthquake and auspice observation apparatus, sophisticated controllable epicenter system, engineering velocity measuring system, high-precision GPS receiver(precision 1mm+1ppmm), INSAR graphics receiving and processing system, absolute gravimeter with the precision less than 1 microgal, satellite gravimeter, Doppler weather radar adopting coherent technology or double polarization technology, visibility measuring apparatus, meteorological sensor, (including temperature, pressure, humidity, wind, precipitation, cloud, visibility, radiation, frozen earth and depth of snow), anti lightning stroke system, multilevel soot and dust sampler, three-dimensional supersonic anemoscope, high-precision intelligent total station machine, three-dimensinal laser scanner, high performance diamond bit used for drilling, laser rangerfinder without cooperative target, wind profiler(affixed with RASS)， GPS electronic probe system, CO2/H2O general observation system, boundary layer laser doppler radar, granule chromatography(3nm-20μm), high-performance data collector and under-water glider

(9) Manufacturing of environment motoring apparatus: SO2 automatic sampler and calcimeter, NOX or NO2 automatic sampler and calcimeter, O3 automatic monitor, CO automatic monitor, sampler and sample cutter for soot and Pm2.5 dust, portable calcimeter for harmful and toxic gas, automatic analyzer for organic pollutants in the air, COD automatic online monitor, BOD automatic online monitor, automatic online monitor for turbidity, DO automatic online monitor, TOC automatic online monitor, automatic online monitor for ammonia nitrogen, radiation dose monitor, ray analyzer, heavy metal online monitoring equipment, online warning and monitoring equipment for biological toxicity of water quality

(10) Manufacturing of instrument and equipment for hydrological data collecting, processing, transmitting and flood warning

(11) Manufacturing of ocean exploring apparatus and equipment: underwater video camera and underwater camera in mesopelagic zone, multi-beam explorer, shallow and deeper subbottom profiler, navigation warm-salt profiler, fluxgate compass, hydraulic wire line winch, underwater airproof electronic connector, energy recycle device used in filtration-proof seawater desaltation with its efficiency more than 90%, marine ecosystem inspection buoy, section probing buoy, disposable measuring instrument of electrical conductivity, temperature and depth (XCTD), on-the-spot water quality measuring apparatus, intelligent chemical transducer for measuring the water quality of the ocean(continues work for 3-6 months), electromagnetic current meter sensor, navigating acoustic Doppler current profiler(self-contained, direct-read, used-in-ship), electricity conductivity rate deep-section profiler, acoustic responding emancipator, far deep sea tide measuring system(set deep into the ocean)

(12) Manufacturing of digital camera of over 10 million pixels

(13) Office machinery manufacturing: multifunctional integration office equipment(copying, printing, facsimile and scanning), color printing equipment, color printer head with high resolution of 2400dpi or above

(14) Manufacturing of film machinery: 2K or 4K digital cinema projector, digital movie camera as well as digital image production and editing device

23. Handicraft and Other Manufacturing Industries

(1) Development and utilization of clean-coal technical product as well as equipment manufacturing (coal gasification, coal liquefaction, water-coal and industrial lump-coal)

(2) Coal ore dressing by washing as well as comprehensive utilization of powered coal(including desulphurized plaster) and coal gangue

(3) Production of the all biodegradable material

(4) Recovery and treatment of waste electrical appliances and electronic product, automobiles, electrical and mechanical equipment, rubber, metal and battery